Thin Walled Fast Speed Injection Molding Machine

KW Series：KW50~KW178

Details

Display

Parameters

Messages

Product Information

KW series high performance fast plastic injection molding machine is equipped with optimized hydraulic system. The injection rate can reach 150mm/s, the injection pressure can reach up to 200Mpa. It’s available to equip with accumulator that reach injection rate at 300mm/s. Thus greatly reduce the production cycle time and increase the production efficiency. The machines are applied in producing flight cup and magnetic disk etc. high precise thin-walled products.

Display

Parameters

SIZE	KW50			KW100		KW118			KW128			KW140			KW178
INJECTION UNIT	A	B	C	A	B	A	B	C	A	B	C	A	B	C	A	B	C
Screw diameter / mm	25	28	31	35	38	35	38	40	38	42	45	38	42	45	42	45	50
Shot Volume theoretical / cm³	49	61	75	154	181	154	181	201	187	228	262	195	238	274	312	358	442
Injection Weight / g	44	55	68	138	160	139	163	181	160	200	235	176	214	247	284	326	402
Injection rate / g/s	40	45	55	75	78	89	105	121	80	86	110	94	115	132	108	125	158
Injection pressure / Mpa	212	169	138	149	126	170	144	130	183	150	130	183	150	130	178	155	125
Screw rotation speed / rpm	220			190		200			185			200			200
Clamping unit
Clamping force / KN	500			1000		1180			1280			1400			1780
Open stroke / mm	255			290		345			345			380			435
Space between tie bars / mm	280×260			355×315		370×370			415×375			420×420			470×470
Max.Mould height / mm	320			350		380			400			450			520
Min.Mould height / mm	135			150		150			150			160			180
Ejector stroke / mm	65			70		100			100			120			135
Ejector force / KN	20			27		33			33			43			39
OTHERS
Max.Pump pressure / Mpa	14			14		14			14			14			14
Pump motor power / KW	5.5			9.5		11			11			13			15
Heating power / KW	4.2			6.2		7.2			7.2			7.2			9.7
Machine dimension&nbs / m	3.1×1.25×1.6			3.5×1.25×1.7		4.2×1.20×1.8			4.3×1.25×1.7			4.5×1.20×1.9			5.05×1.43×2.2
Machine weight / t	1.5			2.7		3.6			3.8			4.5			5.6
Mould Platen Dimensions
Mould Space Dimensions

Messages